Wax Coating Your Chopper Motorcycle

It is time to think of wax coating, once you are satisfied with the condition of the paint of your motorcycle, now start the wax coating. Wax coating helps to preserve the paint as it contains some oils which decrease the rust or oxidation. Wax coating also protects the paint of your chopper motorcycle from natural risks such as dung of the birds, sap from the tree, smog and the ultraviolet rays of the sun. Wax coating gives the strength, shiny finish and richness to the paint. Therefore wax coating is very essential.

chopper bicycle frames

There Are Three Different Types Of Waxes:

CHOPPER

1. Liquid Wax
2. Paste Wax
3. Spray Wax

The liquid wax coating is very easy, but commercial automotive liquid wax is not as durable as paste wax. You can choose a natural wax, such as Carnauba. Carnauba is a tree which is harvested in Brazil, and its leaves are used in wax. Wax with a high carnauba contents is the best. You can view the carnauba contents in any wax (liquid, paste and spray) by going though its label.

Avoid the use of spray wax coating on your motorcycle, as it is too thin as compare to liquid and paste waxes. It is recommended to have two medium applications of wax rather than a single heavy one. Rectangular applicators are quite better that round applicators kitchen sponge. If you are using regularly sponge to wax your chopper motorcycle's paint finish, then you are doing a right thing as it will improve the inherent beauty of the paint. It can protect the paint from the perils of the surroundings and regular riding, and keep your bike looking its best.

Wax coating is not only important, it is very necessary. Some people avoid wax coating and their finish will absolutely suffer from the neglect. Therefore, wax coating is very necessary.

Synthetic wax popularity is growing rapidly as a commercial automotive for motorcycles. Synthetic wax seals off the painted surface with a wall that can last for 9 months, with the very best blends. The synthetics are very clear and shine transparent, therefore it can also achieve a mock Carnauba shines.

Things to Keep in Mind while applying Wax Coating

Wax coating is done in similar way as the base and final coating, in a linear back and forward motion following the shape of the surface. This avoids print swirl marks into the finish.

You can use your fingers as the applicator to apply the wax on your chopper motorcycle. This will allow you to detect any clench or rough particles before you end your painting job.

Wash your hands with after applying wax coating.

During your painting job, always try to use approved cleaners and waxes. Non-approved cleaners may work very effectively for removing road tar but these are able to remove or dull the paint of your chopper motorcycle.

Avoid regular contact (rubbing) with any cloth or towel on your recently painted motorcycle.

We hope all the above information helps in the maintenance of your bike, watch out for more articles on looking after your Chopper Bike.

Wax Coating Your Chopper Motorcycle

CHOPPER